Skip to content
← All guides

Van conversion software for workshops, compared (checked November 2026)

· 8 min read

A conversion workshop needs software that does six jobs — show the client a design, price it, run a team on it, track changes after the client says yes, produce cut lists, and carry the shop's brand — and as of November 2026 no single tool is best at all six: SketchUp and Fusion win on free-form modelling and machining, VanKit on photoreal looks, and VanPlot's Workshop licence on quotes, change orders, weight and a customer-facing planner, for €299 / $329 once. I make VanPlot, so read this with that in mind. Every competitor price below was checked on the vendor's own page in November 2026, and each section says what the other tool does better than mine.

The DIY version of this question is a different list: for planning your own van, see the nine layout planners compared. This post is for shops that convert vans for paying clients.

What a conversion shop needs from software

Six jobs, in the order a client job runs:

  1. Client-facing design. The client has to understand the layout before they pay a deposit — ideally in 3D, ideally on their own sofa.
  2. Quotes. Parts at your prices, your fitting hours, your markup, a deposit schedule. Re-typing a layout into a spreadsheet is where quotes go wrong. How to price a camper van conversion sets out the sum itself.
  3. Seats. You and the people who build with you, on the same projects, without emailing files back and forth.
  4. Change orders. The client approves version 3, then asks for a bigger fridge. You need a dated record of what was agreed and a list of what changed since — with the price and the weight.
  5. Cut lists and shop files. Panel sizes, sheet counts, DXF for the CNC. A layout that cannot become a cut list gets drawn twice.
  6. Branding. The PDF the client takes home should carry your logo, not the software's.

There is a seventh job no generic CAD tool does: checking that the finished van stays under its plated weight. A payload problem found at the weighbridge is the shop's problem, not the client's.

The options at a glance (checked November 2026)

SketchUp ProFusionVanKit BusinessVanspace 3D BusinessVanPlot Workshop
Price$399 / year per user$680 / year or $85 / month per user (US)£49 / month$29 / user / month€299 / $329 once (first 10 shops), then €499 / $549
Van shellsNone — model or download your ownNone5 European platforms, photoreal170+ templates53 vehicles, 277 variants, measured interiors; your base modelled on request
Customer designs itNoNoNo — walkthrough links to viewNoYes — public "Plan with" page under your shop name
Quote with labour and markupNoNoNot listedNot listedYes — Quote page in the Build Pack
Change order vs agreed versionNoVersion history, no priced change listNot listedNot listedYes — Δ price and Δ weight per change
Cut lists / CNC filesVia extensionsYes, CAM toolpaths built inDXF, cut-list PDF, nestingNot listedStud-level cut list, sheet nesting, 1:1 DXF, labels
Payload / axle checkNoNoEstimated ply weight onlyNoLive payload, axle split, centre of mass
Your logoOn your own drawingsOn your own drawingsOn renders, plus a Brand KitNot listedOn the Build Pack cover and share page
SeatsPer userPer userNot stated; multi-seat is Enterprise (price on request)Per user3 seats: you plus two colleagues, each an editor or a viewer; more by email

Over three years for a three-person shop, list prices come to about $3,600 for SketchUp Pro, $6,100 for Fusion and $3,100 for Vanspace 3D Business; VanKit Business is £1,764 for one plan (its seat count is not stated); the VanPlot Workshop licence is $329 once, plus $54 a month only if you embed the customer planner in your own website.

SketchUp — the shop default

SketchUp is the default answer in conversion forums and in many small shops. It models anything, and LayOut (in Pro) turns a model into drawings under your own title block. The cost is time: there is no van in it. You find a shell in the 3D Warehouse or draw one, and a free model is often wrong inside — I wrote up how to check a SketchUp or Fusion van model before you draw on it. SketchUp has no idea what anything weighs or costs, so the quote and the payload check live in a spreadsheet. SketchUp Free is non-commercial; for client work it is Go at $129 a year or Pro at $399 a year. Better than VanPlot at: curved furniture, joinery detail, anything that is not a box. Full comparison.

Fusion — when the CNC is the centre of the shop

Autodesk Fusion is parametric CAD with CAM built in: you design a part and generate the toolpaths in the same file. For a shop that cuts everything on a router, that is a real advantage. It is also the most expensive option here at $680 a year per user in the US, and like SketchUp it has no van, no client view, no quote and no weight. The free personal-use licence excludes commercial work. Better than VanPlot at: parametric parts and machining — VanPlot exports DXF, Fusion drives the machine.

VanKit — the best-looking client pitch

VanKit, by the UK roof-rack maker YAKKT, has the best-looking van shells on the market and AI photoreal renders. Its Business plan is £49 a month, cancel any time: your logo on renders, a Brand Kit that trains the renderer on your past builds, 10 renders a month, walkthrough links to share with clients, CNC-ready DXF and a cut-list PDF. Multi-seat team access is listed under Enterprise, price on request. What it does not list: payload or axle checks (the editor shows an estimated ply weight), quotes with labour, or change orders. Five platforms are covered: Sprinter, Crafter/TGE, Ducato, Master and Transit. Better than VanPlot at: how the van looks in front of a client. Full comparison.

Vanspace 3D — many templates, desktop only

Vanspace 3D is a Windows/Mac download with 170+ van templates and a first-person view. "VS3D for Business" is $29 per user per month and adds a licence to use it professionally, priority support and a social-media shoutout programme — the page lists no team, quoting or branding features. No weight, power or cost maths. Better than VanPlot at: template count and the walkthrough view. Full comparison.

PlanMyCamper — a guide site, not software

PlanMyCamper.de comes up on German searches, so it belongs here: in November 2026 it is an editorial site with 115 guides and a few calculators (energy, power station, toilets), no layout planner and no workshop offer. Good reading for your customers; nothing to run a shop on.

VanPlot Workshop licence — what it does, and where it falls short

The Workshop licence is the lifetime licence plus the shop parts: 3 seats (you plus two colleagues) with live co-editing, a client board (enquiry → designing → approved → building → delivered), a Quote page in the Build Pack (labour rate, hours per part, markup, deposit split, terms), an Approve button that freezes the agreed version, a change-order page listing every change since with its effect on price and weight, your logo on the Build Pack, a compliance checklist page (Italy, Germany, UK, or EU figures only), and 300 AI credits. Cut lists go down to the stud, with sheet nesting and 1:1 DXF — how many sheets a build takes is the same maths.

The part no other tool here has: a public page at vanplot.com/shop/your-name where customers design their van for free on your vans, your parts and your prices, and each design arrives in your workshop as an enquiry with their name, phone and answers. Embedding that page in your own website is €49 / $54 a month, cancel any time.

Where it is weaker, plainly: the vans look like drawings next to VanKit's; free-form modelling is SketchUp's and Fusion's job; there is no CNC toolpath generation, invoicing, scheduling or accounting; the Shop files export needs a desktop; more than 3 seats is an email to me; and it went on sale on 6 November 2026, so few shops run on it yet. The vehicle list covers 53 vehicles; if your base is not there I model it on request.

How to choose

  • You sell on looks and render everything: VanKit Business.
  • Your shop runs on a CNC and one-off parts: Fusion, with a planner for the layout.
  • You already know SketchUp and build mostly bespoke: stay, and check weight elsewhere.
  • You want the quote, the approval, the changes and the cut list to come from one file, and customers to design before they visit: the VanPlot Workshop licence.

Many shops will end up with two: a planner for the layout, the quote and the client, and CAD for the one cabinet that needs it. If you want to see the Workshop side on a call first, write to vladimir@vanplot.com.

FAQ

What software do camper van conversion businesses use?

Most small shops draw in SketchUp, and the ones with a CNC often use Fusion for parts and toolpaths. Van-specific planners are newer: VanKit sells a Business plan at £49 a month (logo on renders, walkthrough links, DXF and cut-list PDF), Vanspace 3D a Business licence at $29 per user per month, and VanPlot a Workshop licence at €299 / $329 once for the first 10 workshops (3 seats for you plus two colleagues, quotes, change orders, cut lists, a customer planner page). Prices checked November 2026.

Can I use SketchUp Free or Fusion for personal use for client work?

No. SketchUp Free is for personal, non-commercial use, and Autodesk's free Fusion for personal use is limited to non-commercial projects. A shop that bills clients needs a paid plan: SketchUp Go is $129 a year, Pro $399 a year; Fusion is $680 a year or $85 a month in the US (checked November 2026).

Is there van conversion software that lets customers design their own van?

VanPlot's Workshop licence includes a public page at vanplot.com/shop/your-name where customers design on your vans with your parts and prices for free, and each design lands in your workshop as an enquiry. VanKit's Business plan shares walkthrough links with clients, but the client views rather than designs. Some large converters build their own configurators in-house.

Can a workshop use the $39 VanPlot licence for client vans?

No. Since 6 November 2026 the lifetime licence is personal, for your own vans (Terms §6). Client work, team seats and the shop features are the Workshop licence: €299 / $329 once for the first 10 workshops, then €499 / $549. An existing personal licence upgrades in place.

Where is VanPlot weaker than the alternatives for a workshop?

Looks: VanKit's photoreal van shells beat VanPlot's drawn ones. Free-form modelling: curved furniture, brackets and one-off parts are faster in SketchUp or Fusion. Machining: Fusion generates CNC toolpaths, VanPlot stops at 1:1 DXF files. VanPlot has no invoicing, scheduling or accounting, more than 3 seats is a conversation by email, and the Workshop licence has only been on sale since November 2026.

Your van is waiting. Measure it, then plan it.

In sixty seconds you'll be dragging a bed into a Ducato. Free, in your browser.

Vladimir Šterjoski

Who makes this

I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.

Vladimir Šterjoski

vladimir@vanplot.comWhy I made it