Skip to content
← All guides

A camper van configurator on your workshop's website: let customers design their own conversion

· 7 min read

A configurator on your workshop's website turns a contact form ("Hi, how much for a Sprinter conversion?") into an enquiry that already carries the van, the layout, the item list, the weight against payload and a rough price at your rates — and VanPlot does this as a page at vanplot.com/shop/your-name that comes with the Workshop licence ($329 / €299 once, founding price), with an optional 49 € / $54 a month to put it inside your own site. That is the short version. The rest of this post is what that changes for a shop, what you should lock down before you publish it, and how the two pieces work.

I build VanPlot, a 3D layout planner that DIY builders use before they cut plywood. Workshops started asking for a way to give the same planner to their own customers, restricted to what they build. This is what I built for them, and where it stops.

Why a lead with a layout beats a contact form

Most conversion shops I talk to get the same first email: a van model (sometimes), a wish list (a fixed bed, a shower, "lots of solar"), and a question about price. The first consult then goes into finding out what the customer actually has and wants, and the first quote is a guess that gets revised three times. Those unpaid hours are the planning hours a conversion business rarely budgets for.

A configurator moves that work to before the first email, done by the customer, on your terms:

What you learnContact formConfigurator lead
Base van, length and roofIf they know itPicked from your list (e.g. a Ducato L3H2)
LayoutA sentenceA 3D layout: bed, kitchen, seating, storage, where each sits
Item listA wish listEvery placed part, from your catalogue
WeightUnknownTotal build weight against the van's payload, flagged when it passes your safety margin
Rough price"How much?"An estimate at your prices, fitting hours, labour rate and markup
Budget and timingMaybeUp to five questions you choose, answered before they start
ContactName and emailConfirmed email, name, phone if you ask for it

The weight row is the one I would not skip. A customer who has watched the payload bar turn amber while adding a 100 l water tank and a second battery arrives with realistic expectations. The weight of a typical conversion is the number most first-time customers have never seen, and it is the number shops get blamed for at the weighbridge. The payload guide explains why it matters before anything is ordered.

What to restrict: your vans, your parts, your prices

A generic planner lets a customer design something you will never build: a pop-top on a van you do not touch, a composting toilet you refuse to fit, a window where your cutting jig cannot reach. A workshop configurator is useful only if it is narrower than the general tool. These are the settings I would decide first:

SettingOptionsDefault
Base vansOnly your vans, or yours firstYours first
Custom body dimensionsOn / offOff
CatalogueYour parts only (plus floor, insulation, walls), your parts first, or the full catalogue minus hidden itemsYour parts first
Hidden and pinned itemsHide what you do not install; pin what you recommendNone
PricesYour purchase price and fitting hours per itemCatalogue defaults
PackagesUp to 6 starting layouts (e.g. Base, Comfort, Rental)None
EstimateShown, rounded to 100 / 500 / 1,000, "from" or "about", incl. VAT or not — or hiddenShown, 500, "from"
Payload marginWeight bar turns amber before payload is reached10 % (amber at 90 %)
Customer featuresAI, custom parts, 3D import, window cutting, walk mode, measurementsAI, custom parts, 3D import off
Designs per customer per day1–203

Three of these deserve a sentence each.

Packages matter more than the catalogue. A customer who starts from your "Comfort" layout and moves the bed 20 cm is a better lead than one who stares at an empty van. Model your two or three standard builds as workshop projects and offer them as starting points.

Prices are what make the estimate yours. The general catalogue has default costs; your purchase prices and fitting hours replace them, and your labour rate and markup sit on top. If you are not ready to show a number, hide the estimate and let the page say "Request a quote" — the weight and the layout still arrive. For what a build costs in parts alone, the cost breakdown is a sanity check.

Margin is your own safety margin, not the law. A shop that wants 15 % headroom on a 3.5 t van sets 15.

How the shop page works

The page lives at vanplot.com/shop/your-name. It shows your logo, intro, next free build slot, phone, your base vans, your packages with "from" prices, and a showcase layout playing in 3D. It opens in your language and the customer can switch to any of the nine VanPlot languages.

  1. The customer presses "Design your van" and signs up with email or Google. Then they answer your questions (use, budget, timing by default) and pick a van and a package.
  2. The project is yours from the first click. It appears on your workshop board as an Enquiry with their name and phone, and you get an email. Because your licence covers it, the customer never hits VanPlot's 15-minute trial or a paywall.
  3. They design in the editor with your vans, your parts first, the estimate updating as they drag and the weight bar watching payload. They do not get the cut lists, the Build Pack or any export: those are what you sell, so they stay on your side.
  4. "Send to your shop" emails you the item count, weight, the estimate at your rate, their answers, and a WhatsApp link when they gave a number. A build past your payload margin is flagged in that email.
  5. You reply in the same project. Notes pinned to parts, status changes and an Approve button live in one thread both sides see in the editor. Approval freezes the agreed version, so the layout you quote is the layout they said yes to.

You switch the page on, and set everything in the table above, from your workshop dashboard.

The embed: 49 € / $54 a month

The page on vanplot.com is included in the Workshop licence: $329 / €299 once, tax included, for the first 10 workshops, then $549 / €499, with 3 seats: you plus two colleagues. You can link it from your site, Instagram bio or Google Business profile and never pay anything else.

If you want the page to sit inside your own website, that is a separate subscription: 49 € / $54 a month, tax included, cancel any time, bought and managed from your workshop dashboard. You paste an iframe snippet into your site. Two honest limits:

  • The landing page is framed; the editor is not. When the customer presses "Design your van", the planner opens full-window on vanplot.com. Google sign-in refuses to run inside a third-party frame, and Safari blocks the cookies a login needs there, so editing inside your page would break for a real share of customers.
  • The frame works only while the subscription is active. If it lapses, the framed page shows an "open on VanPlot" notice instead of the landing; the vanplot.com page keeps working.

Who this is not for

If you build one-off expedition trucks where every job starts with a two-hour conversation, a configurator adds little; plan the layout yourself after the first call and send the customer a share link instead. It earns its keep for shops that build variations of a few standard layouts on a few base vans, and for shops without a showroom whose customers live far away. A shop that builds 8 to 15 vans a year can also use the next-slot field to stop taking leads it cannot build before summer — the build timeline post has the hours that set that number.

The full list of what the Workshop licence includes is on the workshops page. Questions go to vladimir@vanplot.com.

FAQ

What is a camper van configurator for a workshop website?

A planner your customers use on your site before they contact you: they pick one of your base vans, place your furniture and parts, see the weight against payload and a rough price at your rates, and send the finished layout to you as an enquiry. In VanPlot it is a public page at vanplot.com/shop/your-name that comes with the Workshop licence; putting that page inside your own website is a 49 € / $54 monthly subscription, cancel any time.

Can I limit the configurator to the vans and parts I actually build?

Yes. You choose your base vans (only those, or those first), whether the catalogue shows only your parts, your parts first, or the full catalogue minus the items you do not fit, and your own purchase price and fitting hours per item. Custom body dimensions, AI, custom parts and 3D import are off for customers by default; window cutting can be switched off.

Does the customer have to pay for VanPlot?

No. A project started from your page belongs to your workshop from the first click, so the 15-minute trial and the paywall do not apply to it. The customer needs a free account (email or Google), which is also how you get a confirmed email address with every lead. Cut lists, the Build Pack and exports stay with you.

Is the price the customer sees a quote?

No. It is labelled as an estimate with the final quote from you, rounded to 100, 500 or 1,000 as you choose, shown as from or about, and you can hide it completely and show Request a quote instead. It is built from your own prices, fitting hours, labour rate and markup.

Do I need a website to use it?

No. The page at vanplot.com/shop/your-name works on its own; link it from Instagram, Google Business or a QR code at a show. The 49 € / $54 per month subscription is only for showing that page inside a site you already have.

Your van is waiting. Measure it, then plan it.

In sixty seconds you'll be dragging a bed into a Ducato. Free, in your browser.

Vladimir Šterjoski

Who makes this

I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.

Vladimir Šterjoski

vladimir@vanplot.comWhy I made it