Skip to content
← All guides

One van, three people: planning a conversion with your builder, your electrician and your customer

· 7 min read

A van conversion with more than one person on it goes wrong in the gaps between them — two copies of the plan, a file saved over another, a cable run drawn against last week's cabinet — and the fix is one shared project that everyone edits, with named versions and a dated customer approval, instead of files passed around. That is the whole idea. The rest of this post is where exactly it breaks, and how I built VanPlot's Workshop licence to close those gaps without pretending to be Google Docs.

I write this as the person who builds the software, not as a conversion shop. The failure modes below come from shops I have talked to while building the workshop features in autumn 2026, and from the plan the features were built against.

Where builds go wrong between people

A typical small build has three people on it: the builder who owns the layout and the furniture, an electrician (in-house or subcontracted) who owns the 12/230 V system, and the customer who pays and decides. Every one of them works from "the plan". The trouble is that there are usually several.

What goes wrongHow it happensWhat it costs
Two copies of the planThe builder exports a PDF on Monday, keeps editing; the electrician wires from the PDFA fuse board planned for a cupboard that moved 30 cm
Overwritten fileTwo people open the same file, both save, the second save wins silentlyA morning of someone's changes gone, discovered days later
Runs that don't match the furnitureCable routes drawn on an old layout, cabinet redesigned afterHoles in the wrong panel, cable too short, or a cabinet rebuilt around a conduit
"I never agreed to that"Approval by phone or WhatsApp, against a plan that changed sinceAn argument over the invoice with nothing dated to point at
Notes that lose their part"Move the socket left" in an email, no drawingThe socket moved left of the wrong thing

None of these is a skill problem. They are version problems. Each person did their part right — against a different plan.

One project, not three copies

The first fix is boring and does most of the work: there is one project per van, and everybody opens that one. In VanPlot that is a project inside your workshop. The licence comes with three seats — you plus two people you invite by email, each with their own login — and every workshop project is visible to every seat.

Each invited seat has a role:

RoleCanTypical person
OwnerEverything, including inviting, removing and deletingThe shop owner
EditorChange the layout, set the project status, send the plan to the customerThe builder, the electrician
ViewerOpen the plan in 3D read-only, with a "View only" bannerA salesperson, an apprentice

Customers do not take a seat (more on that below). The projects also carry a status — enquiry, designing, approved, building, delivered — so the dashboard is a board grouped by stage. There are no dates or scheduling in it; it answers "where is each van" and nothing more.

Working on the same van at the same time

When two seats open the same project, it goes live. Each person sees who else is in it, the part the other person has selected gets a ring in their colour with a name tag that says "moving" while they drag, and every layout change — a cabinet moved, a part added, a window opening resized — arrives on the other screen within a fraction of a second. Your Cmd+Z undoes your own steps only; it never reverts what the electrician just did.

What it is not: there are no live cursors, and two people dragging the same cabinet at the same moment are not merged — the last move wins. A van has tens of parts and usually two people in it, so in practice that collision is rare and visible when it happens. Saves are guarded too: if someone else saved the project in the meantime, VanPlot does not write over their layout silently — with them in the van, their changes have already arrived; alone, it reloads their version.

One limit matters for the electrician, so here it is plainly:

Part of the planLive between seats?If two people change it
Layout (parts, positions, sizes, openings, the van)Yes, item by itemLast move on the same part wins
Cable and water runsNo — travel with the saveLast save wins
Budget settingsNoLast save wins
MeasurementsNoLast save wins

So the working rule for runs is simple: whoever draws or edits cable runs does it while nobody else has that van open, saves, and the others reload before touching anything. The layout itself you can share freely.

Versions: the plan you agreed vs the plan you have

Pressing Cmd+S keeps a snapshot in History; you can rename any snapshot ("electrics agreed", "after customer call") and revert to it, and the revert is itself undoable. On a workshop project every row has a Compare button: it lists what changed since that version — parts added, removed or changed, with the changed fields, plus the difference in weight and cost — and prints that list as a change-order page.

That is the answer to "the runs don't match the cabinet". Before the electrician starts, save a named version. When the builder changes furniture afterwards, Compare against "electrics agreed" shows exactly which parts moved, so the electrician checks those runs and nothing else.

Notes pinned to parts, and the customer's yes

The customer is the third person, and they come in without a seat. You send them a share link to the 3D plan, carrying your workshop's name instead of a VanPlot sales pitch. They walk through it in the browser, and when they press Approve, VanPlot freezes that exact version in History as "Approved by" plus their name and emails you. That is a dated record of what was agreed — the thing a phone call never gives you.

If the customer started their design on your public "Plan with {shop}" page, it goes one step further. Send to client emails them the link, and the project has a conversation thread in the editor that both sides read: notes, status changes, "please approve" and the approval itself, which also moves the project to approved. A note can be pinned to the selected part, and it shows as a numbered pin on that part in 3D, so "move this socket" points at the socket. Each new note emails the other side at most once an hour per project.

A routine for three people

  1. One project per van, in the workshop. Nobody keeps a local copy; PDFs are outputs, not plans.
  2. Builder sets the layout first. Furniture, tanks, battery position. Save a named version.
  3. Electrician draws the runs alone, saves, names the version. Everyone else reloads.
  4. Send the plan to the customer. They read it in 3D and approve; the approved version is frozen.
  5. Every change after that gets a Compare against the approved version, printed as a change order, before anyone cuts.
  6. Status on the board moves from designing to approved to building, so nobody asks "is this one final?"

It mirrors the build order on the van: layout before runs, runs before panels, agreement before cutting.

If it is your own van

If you are building your own van and hiring an electrician for a day, you do not need any of this. The personal licence lets you send a share link; the electrician opens the plan in 3D in the browser, and can pin comments on parts. Editing together, seats, roles and client approval are Workshop-licence features, because they exist for client work — the personal licence covers your own vans.

What it costs

The Workshop licence is one payment, not a subscription: €299 / $329 for the first ten workshops, then €499 / $549 (November 2026). It includes the three seats, your logo on the Build Pack, a quote page with your labour and markup, change orders, and the public planner page for your customers. Everything is on the Workshop licence page; questions go to vladimir@vanplot.com.

FAQ

Can two people edit the same van plan at the same time?

In VanPlot, yes, inside a Workshop project. Layout changes travel item by item while both of you have the van open: you see who else is in it and which part they have selected, and your undo never reverts their work. There are no live cursors, and if two people move the same cabinet in the same second, the last move wins. Cable and water runs, the budget and measurements are not live: they travel with the save, and the last save wins for them.

Does my customer need a seat or an account to approve the plan?

No. You send the customer a share link to the 3D plan; they open it in the browser, and pressing Approve freezes that exact version in the project history as "Approved by" plus their name and emails you. A customer who started on your public planner page has their own sign-in, approves inside the editor, and the project moves to approved.

How many people can work on one workshop project?

The Workshop licence has three seats: you plus two people you invite by email. Each invited seat is an editor (can change the plan) or a viewer (opens it read-only). Customers do not use a seat. More seats or several sites are a conversation by email, not a checkout.

What happens if the plan changes after the customer approved it?

The approved version stays in History as "Approved by" plus the customer's name. Compare against it lists every part added, removed or changed, with the weight and cost difference, and prints as a change-order page.

Your van is waiting. Measure it, then plan it.

In sixty seconds you'll be dragging a bed into a Ducato. Free, in your browser.

Vladimir Šterjoski

Who makes this

I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.

Vladimir Šterjoski

vladimir@vanplot.comWhy I made it