Mercedes-Benz T1 Bremer panel van camper conversion
The T1 Bremer panel van comes in 8 variants in the planner, with cargo areas from 2.82 m to 3.95 m long inside and payloads up to about 2,400 kg. Drivetrains: RWD.
Also sold as Bremer Transporter, Mercedes 207D 307D 310 409 410, MB 310, TN, Feuerwehr TSF, Firetruck T1, Brandweer T1.
Yes — you can stand up in a Mercedes-Benz T1 Bremer panel van from the 307D–310 Kurz Hochdach roof up: 1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up, which stands an adult up to about 1.70 m.
Interior dimensions by variant
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 207D–210D Kurz | RWD | 2.82 × 1.68 × 1.55 m | 1,100 kg | 3.05 m | 2.45 m |
| 307D–310 Kurz | RWD | 2.82 × 1.68 × 1.55 m | 1,740 kg | 3.05 m | 2.45 m |
| 307D–310 Kurz Hochdach | RWD | 2.82 × 1.68 × 1.83 m | 1,650 kg | 3.05 m | 2.75 m |
| Mittel | RWD | 3.30 × 1.68 × 1.55 m | 1,700 kg | 3.35 m | 2.45 m |
| Mittel Hochdach | RWD | 3.30 × 1.68 × 1.83 m | 1,600 kg | 3.35 m | 2.75 m |
| Lang Hochdach | RWD | 3.95 × 1.68 × 1.83 m | 1,500 kg | 3.70 m | 2.75 m |
| 409 / 410 Mittel Hochdach | RWD | 3.30 × 1.68 × 1.83 m | 2,400 kg | 3.35 m | 2.75 m |
| 409 / 410 Lang Hochdach | RWD | 3.95 × 1.68 × 1.83 m | 2,300 kg | 3.70 m | 2.75 m |
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Mercedes-Benz T 1 (de.wikipedia: weight classes, wheelbases, track) + the factory load-room table and owner measurements quoted on busfreaks.de (threads 39964, 26567, 76504, 40530) (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: the tallest variant has 1.83 m inside; after a ~7 cm floor and ceiling build-up you sit, crouch or pop the top — this is not a stand-up van.
- Bed across: the widest variant measures 1.68 m between the walls — short of a 1.86 m mattress, so plan the bed lengthwise or add wheel-box flares.
- Parking: every variant is over 2.0 m tall outside — underground garages and most height barriers are out.
Payload budget
Depending on variant, the T1 Bremer panel van carries roughly 1,100 kg to 2,400 kg of conversion, gear, water and people before hitting the gross weight limit. A typical full build lands between 400 and 700 kg before you pack — weigh the plan before you cut.
Check your numbers in the payload calculator →Mercedes-Benz T1 Bremer panel van camper layouts and floor plans
The gallery has no layout on the Mercedes-Benz T1 Bremer panel van yet. Its floor plans are drawn on other vans; the planner starts a T1 Bremer panel van with its real interior dimensions and you draw your own layout.
Same van, different badge
These vans are built on the same body as the T1 Bremer panel van — the dimensions and layout advice carry over one-to-one:
Frequently asked
How long is the T1 Bremer panel van inside?
The cargo area runs from 2.82 m in the shortest variant to 3.95 m in the longest, measured from the bulkhead to the rear doors.
Can I stand up in a Mercedes-Benz T1 Bremer panel van?
Yes — you can stand up in a Mercedes-Benz T1 Bremer panel van from the 307D–310 Kurz Hochdach roof up: 1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up, which stands an adult up to about 1.70 m. By roof height — 207D–210D Kurz: 1.55 m raw, ~1.48 m finished — sit-down only; 307D–310 Kurz: 1.55 m raw, ~1.48 m finished — sit-down only; Mittel: 1.55 m raw, ~1.48 m finished — sit-down only; 307D–310 Kurz Hochdach: 1.83 m raw, ~1.76 m finished — stands a 1.70 m adult; Mittel Hochdach: 1.83 m raw, ~1.76 m finished — stands a 1.70 m adult; Lang Hochdach: 1.83 m raw, ~1.76 m finished — stands a 1.70 m adult; 409 / 410 Mittel Hochdach: 1.83 m raw, ~1.76 m finished — stands a 1.70 m adult; 409 / 410 Lang Hochdach: 1.83 m raw, ~1.76 m finished — stands a 1.70 m adult. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
How much payload does a T1 Bremer panel van have for a conversion?
Roughly 1,100 kg to 2,400 kg depending on variant and engine — gross weight minus kerb weight. The build, water, gear and passengers all come out of that number.
Are there ready-made Mercedes-Benz T1 Bremer panel van camper layouts or floor plans?
Not in the gallery yet. The planner has every T1 Bremer panel van variant with its real interior, so you can draw the floor plan in an empty van or start from a template.
Which vans are the same as the T1 Bremer panel van?
The T1 Bremer panel van shares its body and dimensions with: Mercedes-Benz T1 Bremer Kombi / Bus, Bremer Transporter, Mercedes 207D 307D 310 409 410, MB 310, TN, Feuerwehr TSF, Firetruck T1, Brandweer T1, Bremer Kombi, Mercedes 308 Bus, T1 Bus.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your T1 Bremer panel van in 3D
Every variant on this page is in the planner with real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski