Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD camper conversion dimensions
The Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD measures 2.82 m long, 1.68 m wide and 1.83 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.05 m wheelbase. Kerb weight 1,850 kg, payload about 1,650 kg.
Dimensions
- Cargo length
- 2.82 m
- Interior width
- 1.68 m
- Interior height
- 1.83 m
- Wheelbase
- 3.05 m
- Exterior length
- 4.75 m
- Exterior width
- 2.00 m
- Exterior height
- 2.75 m
- Kerb weight
- 1,850 kg
- Payload ≈
- 1,650 kg
- Gross weight
- 3,500 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Mercedes-Benz T 1 (de.wikipedia: weight classes, wheelbases, track) + the factory load-room table and owner measurements quoted on busfreaks.de (threads 39964, 26567, 76504, 40530) (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.70 m.
- Bed across: 1.68 m between the walls, about 1.62 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
- Parking: 2.75 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 1,650 kg — 3,500 kg gross minus 1,850 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 143 kg, roughly 907 kg is left for water, gear and people.
Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach layouts and floor plans
The gallery has no layout on the Mercedes-Benz T1 Bremer panel van yet. Its floor plans are drawn on other vans; the planner starts a T1 Bremer panel van with its real interior dimensions and you draw your own layout.
Other T1 Bremer panel van variants
All 8 T1 Bremer panel van variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 207D–210D Kurz | RWD | 2.82 × 1.68 × 1.55 m | 1,100 kg | 3.05 m | 2.45 m |
| 307D–310 Kurz | RWD | 2.82 × 1.68 × 1.55 m | 1,740 kg | 3.05 m | 2.45 m |
| 307D–310 Kurz Hochdach | RWD | 2.82 × 1.68 × 1.83 m | 1,650 kg | 3.05 m | 2.75 m |
| Mittel | RWD | 3.30 × 1.68 × 1.55 m | 1,700 kg | 3.35 m | 2.45 m |
| Mittel Hochdach | RWD | 3.30 × 1.68 × 1.83 m | 1,600 kg | 3.35 m | 2.75 m |
| Lang Hochdach | RWD | 3.95 × 1.68 × 1.83 m | 1,500 kg | 3.70 m | 2.75 m |
| 409 / 410 Mittel Hochdach | RWD | 3.30 × 1.68 × 1.83 m | 2,400 kg | 3.35 m | 2.75 m |
| 409 / 410 Lang Hochdach | RWD | 3.95 × 1.68 × 1.83 m | 2,300 kg | 3.70 m | 2.75 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD?
2.82 m long, 1.68 m wide and 1.83 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 4.75 m × 2.00 m × 2.75 m on a 3.05 m wheelbase.
Can I stand up in a Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD?
1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.70 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD?
1.68 m between the walls, about 1.62 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
How much payload does a Mercedes-Benz T1 Bremer panel van 307D–310 Kurz Hochdach RWD have?
About 1,650 kg: 3,500 kg gross weight minus 1,850 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your T1 Bremer panel van 307D–310 Kurz Hochdach in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski