Skip to content

Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD camper conversion dimensions

The Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD measures 3.30 m long, 1.68 m wide and 1.83 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.35 m wheelbase. Kerb weight 2,200 kg, payload about 2,400 kg.

Dimensions

Cargo length
3.30 m
Interior width
1.68 m
Interior height
1.83 m
Wheelbase
3.35 m
Exterior length
5.25 m
Exterior width
2.00 m
Exterior height
2.75 m
Kerb weight
2,200 kg
Payload ≈
2,400 kg
Gross weight
4,600 kg

Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.

What fits

  • Standing: 1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.70 m.
  • Bed across: 1.68 m between the walls, about 1.62 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
  • Parking: 2.75 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
  • Payload: about 2,400 kg — 4,600 kg gross minus 2,200 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 148 kg, roughly 1,652 kg is left for water, gear and people.

Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach layouts and floor plans

The gallery has no layout on the Mercedes-Benz T1 Bremer panel van yet. Its floor plans are drawn on other vans; the planner starts a T1 Bremer panel van with its real interior dimensions and you draw your own layout.

Other T1 Bremer panel van variants

All 8 T1 Bremer panel van variants in the planner — same body, different length, roof or drivetrain:

VariantDriveInterior L × W × HPayload ≈WheelbaseExt. height
207D–210D KurzRWD2.82 × 1.68 × 1.55 m1,100 kg3.05 m2.45 m
307D–310 KurzRWD2.82 × 1.68 × 1.55 m1,740 kg3.05 m2.45 m
307D–310 Kurz HochdachRWD2.82 × 1.68 × 1.83 m1,650 kg3.05 m2.75 m
MittelRWD3.30 × 1.68 × 1.55 m1,700 kg3.35 m2.45 m
Mittel HochdachRWD3.30 × 1.68 × 1.83 m1,600 kg3.35 m2.75 m
Lang HochdachRWD3.95 × 1.68 × 1.83 m1,500 kg3.70 m2.75 m
409 / 410 Mittel HochdachRWD3.30 × 1.68 × 1.83 m2,400 kg3.35 m2.75 m
409 / 410 Lang HochdachRWD3.95 × 1.68 × 1.83 m2,300 kg3.70 m2.75 m
Every Mercedes-Benz T1 Bremer panel van variant compared →What does “409 / 410 Mittel Hochdach” actually mean? →

Check the numbers

Frequently asked

What are the interior dimensions of a Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD?

3.30 m long, 1.68 m wide and 1.83 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 5.25 m × 2.00 m × 2.75 m on a 3.35 m wheelbase.

Can I stand up in a Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD?

1.83 m floor-to-headliner, about 1.76 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.70 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.

Can I sleep across a Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD?

1.68 m between the walls, about 1.62 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.

How much payload does a Mercedes-Benz T1 Bremer panel van 409 / 410 Mittel Hochdach RWD have?

About 2,400 kg: 4,600 kg gross weight minus 2,200 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.

Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.

Plan your T1 Bremer panel van 409 / 410 Mittel Hochdach in 3D

This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.

Vladimir Šterjoski

Who makes this

I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.

Vladimir Šterjoski

vladimir@vanplot.comWhy I made it