Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD camper conversion dimensions
The Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD measures 4.69 m long, 1.89 m wide and 1.94 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 4.25 m wheelbase. Kerb weight 3,300 kg, payload about 4,190 kg.
Dimensions
- Cargo length
- 4.69 m
- Interior width
- 1.89 m
- Interior height
- 1.94 m
- Wheelbase
- 4.25 m
- Exterior length
- 6.88 m
- Exterior width
- 2.18 m
- Exterior height
- 2.72 m
- Kerb weight
- 3,300 kg
- Payload ≈
- 4,190 kg
- Gross weight
- 7,490 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Mercedes-Benz T 2 LN1: the Ludwigsfelde works sheet (museum-digital PDF 08210357523: wheelbases, weight steps, 5450–7210 × 2180 × 2560–2720) + 7globetrotters.de 711 D data (6330 long, 4140 load floor, 1900 wide, 1940 high) (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 1.94 m floor-to-headliner, about 1.87 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.80 m.
- Bed across: 1.89 m between the walls, about 1.83 m after 6 cm of finished walls — sleeps a 1.75 m adult transversely with 5 cm to spare.
- Parking: 2.72 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 4,190 kg — 7,490 kg gross minus 3,300 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 164 kg, roughly 3,426 kg is left for water, gear and people.
Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach layouts and floor plans
The gallery has no layout on the Mercedes-Benz T2 LN1 panel van yet. Its floor plans are drawn on other vans; the planner starts a T2 LN1 panel van with its real interior dimensions and you draw your own layout.
Other T2 LN1 panel van variants
All 4 T2 LN1 panel van variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 609D Kurz | RWD | 3.26 × 1.89 × 1.78 m | 2,650 kg | 3.15 m | 2.56 m |
| 709D / 711D Mittel Hochdach | RWD | 4.14 × 1.89 × 1.94 m | 3,500 kg | 3.70 m | 2.72 m |
| 809D / 811D Lang Hochdach | RWD | 4.69 × 1.89 × 1.94 m | 4,190 kg | 4.25 m | 2.72 m |
| 809D / 814D Lang Maxi Hochdach | RWD | 4.93 × 1.89 × 1.94 m | 4,090 kg | 4.25 m | 2.72 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD?
4.69 m long, 1.89 m wide and 1.94 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 6.88 m × 2.18 m × 2.72 m on a 4.25 m wheelbase.
Can I stand up in a Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD?
1.94 m floor-to-headliner, about 1.87 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.80 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD?
1.89 m between the walls, about 1.83 m after 6 cm of finished walls — sleeps a 1.75 m adult transversely with 5 cm to spare.
How much payload does a Mercedes-Benz T2 LN1 panel van 809D / 811D Lang Hochdach RWD have?
About 4,190 kg: 7,490 kg gross weight minus 3,300 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your T2 LN1 panel van 809D / 811D Lang Hochdach in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski