Mercedes-Benz T2 LN1 panel van 609D Kurz RWD camper conversion dimensions
The Mercedes-Benz T2 LN1 panel van 609D Kurz RWD measures 3.26 m long, 1.89 m wide and 1.78 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.15 m wheelbase. Kerb weight 2,950 kg, payload about 2,650 kg.
Dimensions
- Cargo length
- 3.26 m
- Interior width
- 1.89 m
- Interior height
- 1.78 m
- Wheelbase
- 3.15 m
- Exterior length
- 5.45 m
- Exterior width
- 2.18 m
- Exterior height
- 2.56 m
- Kerb weight
- 2,950 kg
- Payload ≈
- 2,650 kg
- Gross weight
- 5,600 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Mercedes-Benz T 2 LN1: the Ludwigsfelde works sheet (museum-digital PDF 08210357523: wheelbases, weight steps, 5450–7210 × 2180 × 2560–2720) + 7globetrotters.de 711 D data (6330 long, 4140 load floor, 1900 wide, 1940 high) (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 1.78 m floor-to-headliner, about 1.72 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top.
- Bed across: 1.89 m between the walls, about 1.83 m after 6 cm of finished walls — sleeps a 1.75 m adult transversely with 5 cm to spare.
- Parking: 2.56 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 2,650 kg — 5,600 kg gross minus 2,950 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 150 kg, roughly 1,900 kg is left for water, gear and people.
Mercedes-Benz T2 LN1 panel van 609D Kurz layouts and floor plans
The gallery has no layout on the Mercedes-Benz T2 LN1 panel van yet. Its floor plans are drawn on other vans; the planner starts a T2 LN1 panel van with its real interior dimensions and you draw your own layout.
Other T2 LN1 panel van variants
All 4 T2 LN1 panel van variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 609D Kurz | RWD | 3.26 × 1.89 × 1.78 m | 2,650 kg | 3.15 m | 2.56 m |
| 709D / 711D Mittel Hochdach | RWD | 4.14 × 1.89 × 1.94 m | 3,500 kg | 3.70 m | 2.72 m |
| 809D / 811D Lang Hochdach | RWD | 4.69 × 1.89 × 1.94 m | 4,190 kg | 4.25 m | 2.72 m |
| 809D / 814D Lang Maxi Hochdach | RWD | 4.93 × 1.89 × 1.94 m | 4,090 kg | 4.25 m | 2.72 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Mercedes-Benz T2 LN1 panel van 609D Kurz RWD?
3.26 m long, 1.89 m wide and 1.78 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 5.45 m × 2.18 m × 2.56 m on a 3.15 m wheelbase.
Can I stand up in a Mercedes-Benz T2 LN1 panel van 609D Kurz RWD?
1.78 m floor-to-headliner, about 1.72 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Mercedes-Benz T2 LN1 panel van 609D Kurz RWD?
1.89 m between the walls, about 1.83 m after 6 cm of finished walls — sleeps a 1.75 m adult transversely with 5 cm to spare.
How much payload does a Mercedes-Benz T2 LN1 panel van 609D Kurz RWD have?
About 2,650 kg: 5,600 kg gross weight minus 2,950 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your T2 LN1 panel van 609D Kurz in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski