Toyota ProAce M FWD camper conversion dimensions
The Toyota ProAce M FWD measures 2.51 m long, 1.63 m wide and 1.40 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.27 m wheelbase. Kerb weight 1,780 kg, payload about 1,320 kg.
Dimensions
- Cargo length
- 2.51 m
- Interior width
- 1.63 m
- Interior height
- 1.40 m
- Wheelbase
- 3.27 m
- Exterior length
- 4.96 m
- Exterior width
- 1.92 m
- Exterior height
- 1.90 m
- Kerb weight
- 1,780 kg
- Payload ≈
- 1,320 kg
- Gross weight
- 3,100 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
What fits
- Standing: 1.40 m floor-to-headliner, about 1.33 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top.
- Bed across: 1.63 m between the walls, about 1.57 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
- Parking: 1.90 m tall outside — clears a standard 2.0 m garage barrier (French motorway class 1).
- Payload: about 1,320 kg — 3,100 kg gross minus 1,780 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 145 kg, roughly 575 kg is left for water, gear and people.
Other ProAce variants
All 3 ProAce variants in the planner — same body, different length, roof or drivetrain:
Check the numbers
Frequently asked
What are the interior dimensions of a Toyota ProAce M FWD?
2.51 m long, 1.63 m wide and 1.40 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 4.96 m × 1.92 m × 1.90 m on a 3.27 m wheelbase.
Can I stand up in a Toyota ProAce M FWD?
1.40 m floor-to-headliner, about 1.33 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Toyota ProAce M FWD?
1.63 m between the walls, about 1.57 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
How much payload does a Toyota ProAce M FWD have?
About 1,320 kg: 3,100 kg gross weight minus 1,780 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your ProAce M in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski