Mercedes-Benz Metris 135" · Standard roof RWD camper conversion dimensions
The Mercedes-Benz Metris 135" · Standard roof RWD measures 3.06 m long, 1.67 m wide and 1.37 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.43 m wheelbase. Kerb weight 1,925 kg, payload about 1,075 kg.
Dimensions
- Cargo length
- 3.06 m
- Interior width
- 1.67 m
- Interior height
- 1.37 m
- Wheelbase
- 3.43 m
- Exterior length
- 5.37 m
- Exterior width
- 1.93 m
- Exterior height
- 1.91 m
- Kerb weight
- 1,925 kg
- Payload ≈
- 1,075 kg
- Gross weight
- 3,000 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: MBUSA media — 2019 Metris Cargo Van specifications · checked Sep 2026
- Door openings: Mercedes-Benz UK — Vito panel van and crew van (01/2024) · checked Sep 2026
What fits
- Standing: 1.37 m floor-to-headliner, about 1.30 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top.
- Bed across: 1.67 m between the walls, about 1.61 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
- Parking: 1.91 m tall outside — clears a standard 2.0 m garage barrier (French motorway class 1).
- Payload: about 1,075 kg — 3,000 kg gross minus 1,925 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 149 kg, roughly 326 kg is left for water, gear and people.
Other Metris variants
All 2 Metris variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 126" · Standard roof | RWD | 2.83 × 1.67 × 1.37 m | 1,100 kg | 3.20 m | 1.91 m |
| 135" · Standard roof | RWD | 3.06 × 1.67 × 1.37 m | 1,075 kg | 3.43 m | 1.91 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Mercedes-Benz Metris 135" · Standard roof RWD?
3.06 m long, 1.67 m wide and 1.37 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 5.37 m × 1.93 m × 1.91 m on a 3.43 m wheelbase.
Can I stand up in a Mercedes-Benz Metris 135" · Standard roof RWD?
1.37 m floor-to-headliner, about 1.30 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Mercedes-Benz Metris 135" · Standard roof RWD?
1.67 m between the walls, about 1.61 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
How much payload does a Mercedes-Benz Metris 135" · Standard roof RWD have?
About 1,075 kg: 3,000 kg gross weight minus 1,925 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your Metris 135" · Standard roof in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski