Vanspace 3D vs SketchUp for a camper van layout (and the third option), checked November 2026
· 7 min read
Pick Vanspace 3D if you want a quick van layout on a Windows or Mac computer from a ready-made template and a big furniture library, for $27–57 once; pick SketchUp if you need to model shapes no library has and will spend the hours learning it — it has a free web version; and know that neither one tells you what your build weighs, how the axles load or how big the battery should be (prices checked November 2026). That is the short answer. The rest of this page is the table behind it, with VanPlot as a third column — I build VanPlot, so read that column with that in mind and check the sources.
People who type “Vanspace 3D vs SketchUp” have usually narrowed it down to these two: one is the van-only app that shows up in van-life adverts, the other is what every forum thread recommends. They are not the same kind of tool, and the choice is mostly about what you need the drawing for.
The comparison table
Every competitor figure below comes from the vendor’s own page, opened in November 2026: Vanspace 3D prices and counts from its checkout (get.vanspace3d.com — the home page shows no prices), platforms and furniture count from vanspace3d.com, refund terms from vanspace3d.com/refund-policy, the rating from Trustpilot; SketchUp prices from sketchup.trimble.com (annual billing, tax excluded) and its AI features from the SketchUp 2026.1 release notes.
| Vanspace 3D | SketchUp | VanPlot | |
|---|---|---|---|
| What it is | Van layout app | General-purpose 3D modelling | Van layout planner with the engineering numbers |
| Price | $27 once for 1 year, $57 once for lifetime; business $29 per user per month | Free (web); Go $129/yr; Pro $399/yr; Studio $71.58/mo billed annually | $39 / €36 once (founding price) |
| Try before paying | No trial listed; 30-day refund only if you never log in | Free web version | 15 minutes of active time, no card, work saved |
| Runs on | Windows & Mac desktop app | Free: browser · Go: browser + iPad · Pro: adds desktop | Browser |
| Van models | 170+ templates (checkout), or enter your own measurements | None built in — you find one in the 3D Warehouse or draw it | 53 vehicles, 277 variants from manufacturer specs |
| Furniture | 400+ components (home page), “500+ furniture & materials” (checkout) | You model it, or download someone else’s | 162 catalog items, parametric, plus AI-made parts |
| Free-form shapes | Library pieces | Anything, at any precision | Catalog pieces; AI parts are simple blocks |
| Weight, axle loads, centre of mass | Not included | Not included | Live as you place items |
| Power and budget | Not included | Not included (spreadsheet) | Battery/solar sizing, itemised budget |
| Cut list | Not listed | Via extensions on the desktop app (Pro) | Stud-level, from your framing |
| AI | None listed | AI Render and Generate Object, on credits (Free 0, Go 100, Pro 150 a month) | VanPlot AI (beta), 50 credits with the licence |
| Time to a first layout | “In minutes”, per its site | Hours to weeks of learning | Minutes |
Where Vanspace 3D wins
- It is built for vans and nothing else. You open a van template, drag in beds and kitchens, and walk through the interior in first person. Its site promises a layout in minutes, and for a simple build that is credible: there is nothing to model.
- Its furniture library is big. 400+ pre-built components on the home page, 500+ “furniture & materials” at checkout — roughly two and a half times VanPlot’s 162 catalog items.
- It is cheap for one build. $27 for a year of access is less than any paid SketchUp plan and less than VanPlot’s $39.
What to check before buying: there is no trial, and the refund policy is unusual — 30 days to change your mind, but only if you have not logged in; logging in “to view templates or to test the software” waives it. On Trustpilot it scores 2.4/5 from 290 reviews, 16% five-star and 68% one-star (checked November 2026). Read both ends.
Where SketchUp wins
- It models anything. A curved overhead locker, a swivel-seat base, a part you will send to a CNC router or a 3D printer (SketchUp Free exports STL) — if you can describe the shape, you can draw it at any precision. No van app does this.
- It has a real free version. SketchUp Free runs in the browser with 10 GB of cloud storage. For a build where the layout is already decided and you only need to detail one cabinet, that may be all you need.
- The 3D Warehouse is huge, and its AI (AI Render with a prompt and in-painting, Generate Object for textured 3D objects from text or a photo) is broader than any van tool’s.
The cost is time. You first need a van model you can trust — the guide to SketchUp and Fusion 360 van templates shows where they come from and the three numbers to check against the manufacturer figures — and then you draw every cabinet yourself. Builders on the forums put the learning curve anywhere from hours to weeks.
What neither of them does
Both tools answer “does it fit?”. Neither answers “can the van carry it?”. A typical conversion adds several hundred kilograms — how much a van conversion weighs breaks it down — and the payload left on many large vans is tighter than people expect once water, people and gear are in. Where that weight sits matters too: a water tank and battery behind the rear axle can overload it even when the total is legal (the payload guide explains the axle split).
Neither tool sizes a battery and solar system against your appliances, prices the build, or counts the plywood sheets and studs you need. With Vanspace 3D or SketchUp, those live in a separate spreadsheet you keep in sync by hand.
Where VanPlot sits
VanPlot is the third option most people comparing these two have not heard of. It is van-specific like Vanspace 3D — pick one of 53 vehicles in 277 variants, with the wheel arches and wall taper of that body — and runs in the browser like SketchUp Free, with nothing to install. What it adds is the planning maths: payload, front/rear axle loads and centre of mass update live as you move furniture; battery and solar are sized against what you plug in; the budget is itemised; the cut list comes stud by stud from your framing.
Where it loses, honestly: the furniture library is smaller than Vanspace’s, and it is not free-form CAD — for a curved one-off piece, SketchUp or Fusion 360 is still the right tool. Plenty of builders plan the layout and the numbers in VanPlot and detail one tricky cabinet in SketchUp afterwards. Price: $39 / €36 once at the founding price, after a free 15-minute trial that needs no card and keeps your work; refunds for 14 days even after you log in.
The full head-to-head pages are VanPlot vs Vanspace 3D and VanPlot vs SketchUp; nine van layout planners compared covers the rest of the field.
So which one?
- You want a picture of a simple layout this evening, on a laptop, and will pay once: Vanspace 3D — after reading the refund terms.
- You are designing custom or curved furniture, or parts for a CNC, and have time to learn: SketchUp; start with the free web version.
- You need to know the build is legal on weight, powered for your trip and costed before you cut wood: a planner that does the numbers — VanPlot, or a spreadsheet next to either of the other two.
FAQ
Is Vanspace 3D better than SketchUp for a camper van layout?
For a fast, van-only layout, usually yes: you start from one of its 170+ van templates and drag in furniture from a 400+ piece library, on a Windows or Mac computer, for $27 (one year) or $57 (lifetime). SketchUp is better when you need shapes no library has — curved cabinets, CNC parts — and it has a free web version, but you bring the van model yourself and learn general CAD first. Neither calculates weight, axle loads or power. Checked November 2026.
Is SketchUp free for a van conversion?
SketchUp Free runs in the browser with 10 GB of cloud storage and exports SKP, PNG and STL. The paid plans are Go at $10.75 a month billed annually ($129 a year, web and iPad) and Pro at $33.25 a month billed annually ($399 a year, adds the desktop app). Prices exclude tax, checked November 2026 on sketchup.trimble.com.
Does Vanspace 3D have a free trial?
No free trial or free version is listed on vanspace3d.com or its checkout. Its refund policy gives 30 days only if you have not logged into the software; logging in, even to look at templates, waives that period (vanspace3d.com/refund-policy, checked November 2026).
Can Vanspace 3D or SketchUp tell me if my van is overweight?
No. Neither lists payload, axle loads or centre of mass. You total the weights in a spreadsheet, or use a planner that does it: VanPlot computes payload, the front/rear axle split and the centre of mass live as you place furniture.
Where does VanPlot fit between the two?
It is van-specific like Vanspace 3D — 53 vehicles in 277 variants built from manufacturer specs — and runs in the browser like SketchUp Free, and it adds what neither has: payload and axle loads, power sizing, an itemised budget and a stud-level cut list. It has fewer furniture pieces than Vanspace (162) and does not model free-form shapes like SketchUp. $39 / €36 once after a free 15-minute trial.