Toyota HiAce LWB RWD camper conversion dimensions
The Toyota HiAce LWB RWD measures 2.53 m long, 1.77 m wide and 1.34 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.21 m wheelbase. Kerb weight 2,240 kg, payload about 1,060 kg.
Dimensions
- Cargo length
- 2.53 m
- Interior width
- 1.77 m
- Interior height
- 1.34 m
- Wheelbase
- 3.21 m
- Exterior length
- 5.26 m
- Exterior width
- 1.95 m
- Exterior height
- 1.99 m
- Kerb weight
- 2,240 kg
- Payload ≈
- 1,060 kg
- Gross weight
- 3,300 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Toyota Australia — HiAce specification sheet (08/2025) · checked Sep 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Sep 2026
What fits
- Standing: 1.34 m floor-to-headliner, about 1.27 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top.
- Bed across: 1.77 m between the walls, about 1.71 m after 6 cm of finished walls — sleeps a 1.65 m adult transversely with 5 cm to spare.
- Parking: 1.99 m tall outside — clears a standard 2.0 m garage barrier (French motorway class 1).
- Payload: about 1,060 kg — 3,300 kg gross minus 2,240 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 148 kg, roughly 312 kg is left for water, gear and people.
Toyota HiAce LWB layouts and floor plans
The gallery has no layout on the Toyota HiAce yet. Its floor plans are drawn on other vans; the planner starts a HiAce with its real interior dimensions and you draw your own layout.
Other HiAce variants
All 2 HiAce variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| LWB | RWD | 2.53 × 1.77 × 1.34 m | 1,060 kg | 3.21 m | 1.99 m |
| SLWB | RWD | 3.18 × 1.77 × 1.61 m | 1,100 kg | 3.86 m | 2.28 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Toyota HiAce LWB RWD?
2.53 m long, 1.77 m wide and 1.34 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 5.26 m × 1.95 m × 1.99 m on a 3.21 m wheelbase.
Can I stand up in a Toyota HiAce LWB RWD?
1.34 m floor-to-headliner, about 1.27 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Toyota HiAce LWB RWD?
1.77 m between the walls, about 1.71 m after 6 cm of finished walls — sleeps a 1.65 m adult transversely with 5 cm to spare.
How much payload does a Toyota HiAce LWB RWD have?
About 1,060 kg: 3,300 kg gross weight minus 2,240 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your HiAce LWB in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski