Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD camper conversion dimensions
The Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD measures 7.16 m long, 2.31 m wide and 1.98 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 5.05 m wheelbase. Kerb weight 8,255 kg, payload about 6,715 kg.
Dimensions
- Cargo length
- 7.16 m
- Interior width
- 2.31 m
- Interior height
- 1.98 m
- Wheelbase
- 5.05 m
- Exterior length
- 9.91 m
- Exterior width
- 2.44 m
- Exterior height
- 3.15 m
- Kerb weight
- 8,255 kg
- Payload ≈
- 6,715 kg
- Gross weight
- 14,970 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Thomas Built Saf-T-Liner C2 spec sheet (wheelbases 158–279 in, GVWR 33 000 lb, 78 in headroom) + dealer listings for overall / interior lengths and curb weights (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 1.98 m floor-to-headliner, about 1.91 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.85 m.
- Bed across: 2.31 m between the walls, about 2.25 m after 6 cm of finished walls — sleeps a 2.20 m adult transversely with 5 cm to spare.
- Parking: 3.15 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 6,715 kg — 14,970 kg gross minus 8,255 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 194 kg, roughly 5,921 kg is left for water, gear and people.
Thomas Built Saf-T-Liner C2 10 windows · 60 pax layouts and floor plans
The gallery has no layout on the Thomas Built Saf-T-Liner C2 yet. Its floor plans are drawn on other vans; the planner starts a Saf-T-Liner C2 with its real interior dimensions and you draw your own layout.
Other Saf-T-Liner C2 variants
All 4 Saf-T-Liner C2 variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 8 windows · 48 pax | RWD | 6.10 × 2.31 × 1.98 m | 7,030 kg | 4.01 m | 3.15 m |
| 10 windows · 60 pax | RWD | 7.16 × 2.31 × 1.98 m | 6,715 kg | 5.05 m | 3.15 m |
| 12 windows · 72 pax | RWD | 8.23 × 2.31 × 1.98 m | 6,440 kg | 6.04 m | 3.15 m |
| 13 windows · 77 pax | RWD | 9.14 × 2.31 × 1.98 m | 6,125 kg | 7.09 m | 3.15 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD?
7.16 m long, 2.31 m wide and 1.98 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 9.91 m × 2.44 m × 3.15 m on a 5.05 m wheelbase.
Can I stand up in a Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD?
1.98 m floor-to-headliner, about 1.91 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.85 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD?
2.31 m between the walls, about 2.25 m after 6 cm of finished walls — sleeps a 2.20 m adult transversely with 5 cm to spare.
How much payload does a Thomas Built Saf-T-Liner C2 10 windows · 60 pax RWD have?
About 6,715 kg: 14,970 kg gross weight minus 8,255 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your Saf-T-Liner C2 10 windows · 60 pax in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski