Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD camper conversion dimensions
The Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD measures 4.03 m long, 1.85 m wide and 1.90 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.50 m wheelbase. Kerb weight 3,600 kg, payload about 2,390 kg.
Dimensions
- Cargo length
- 4.03 m
- Interior width
- 1.85 m
- Interior height
- 1.90 m
- Wheelbase
- 3.50 m
- Exterior length
- 5.99 m
- Exterior width
- 2.10 m
- Exterior height
- 2.77 m
- Kerb weight
- 3,600 kg
- Payload ≈
- 2,390 kg
- Gross weight
- 5,990 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Mercedes-Benz T 2 (de.wikipedia ranges) + the factory load-room table (busfreaks.de 39964 / 76993) and the L 508 D sheet on vandimensions.com (5043 / 5993 / 6943 long, 1855 between the walls, 1490 between the wheelhouses) (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 1.90 m floor-to-headliner, about 1.83 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.80 m.
- Bed across: 1.85 m between the walls, about 1.79 m after 6 cm of finished walls — sleeps a 1.70 m adult transversely with 5 cm to spare.
- Parking: 2.77 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 2,390 kg — 5,990 kg gross minus 3,600 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 155 kg, roughly 1,635 kg is left for water, gear and people.
Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach layouts and floor plans
The gallery has no layout on the Mercedes-Benz T2 Düdo panel van yet. Its floor plans are drawn on other vans; the planner starts a T2 Düdo panel van with its real interior dimensions and you draw your own layout.
Other T2 Düdo panel van variants
All 6 T2 Düdo panel van variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 508D Kurz | RWD | 3.08 × 1.85 × 1.60 m | 2,000 kg | 2.95 m | 2.38 m |
| 508D Mittel | RWD | 4.03 × 1.85 × 1.60 m | 1,950 kg | 3.50 m | 2.38 m |
| 508D Mittel Hochdach | RWD | 4.03 × 1.85 × 1.90 m | 1,900 kg | 3.50 m | 2.77 m |
| 508D Lang Hochdach | RWD | 4.97 × 1.85 × 1.90 m | 1,800 kg | 4.10 m | 2.79 m |
| 608D Mittel Hochdach | RWD | 4.03 × 1.85 × 1.90 m | 2,390 kg | 3.50 m | 2.77 m |
| 608D Lang Hochdach | RWD | 4.97 × 1.85 × 1.90 m | 2,290 kg | 4.10 m | 2.79 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD?
4.03 m long, 1.85 m wide and 1.90 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 5.99 m × 2.10 m × 2.77 m on a 3.50 m wheelbase.
Can I stand up in a Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD?
1.90 m floor-to-headliner, about 1.83 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.80 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD?
1.85 m between the walls, about 1.79 m after 6 cm of finished walls — sleeps a 1.70 m adult transversely with 5 cm to spare.
How much payload does a Mercedes-Benz T2 Düdo panel van 608D Mittel Hochdach RWD have?
About 2,390 kg: 5,990 kg gross weight minus 3,600 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your T2 Düdo panel van 608D Mittel Hochdach in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski