Skip to content

Land Rover Defender 110 Hard Top AWD camper conversion dimensions

The Land Rover Defender 110 Hard Top AWD measures 1.75 m long, 1.45 m wide and 1.30 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 2.79 m wheelbase. Kerb weight 2,065 kg, payload about 985 kg.

Dimensions

Cargo length
1.75 m
Interior width
1.45 m
Interior height
1.30 m
Wheelbase
2.79 m
Exterior length
4.79 m
Exterior width
1.79 m
Exterior height
2.04 m
Kerb weight
2,065 kg
Payload ≈
985 kg
Gross weight
3,050 kg

Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.

What fits

  • Standing: 1.30 m floor-to-headliner, about 1.23 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top.
  • Bed across: 1.45 m between the walls, about 1.39 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.
  • Parking: 2.04 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
  • Payload: about 985 kg — 3,050 kg gross minus 2,065 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 143 kg, roughly 242 kg is left for water, gear and people.

Land Rover Defender 110 Hard Top layouts and floor plans

The gallery has no layout on the Land Rover Defender 110 yet. Its floor plans are drawn on other vans; the planner starts a Defender 110 with its real interior dimensions and you draw your own layout.

Other Defender 110 variants

All 1 Defender 110 variants in the planner — same body, different length, roof or drivetrain:

VariantDriveInterior L × W × HPayload ≈WheelbaseExt. height
Hard TopAWD1.75 × 1.45 × 1.30 m985 kg2.79 m2.04 m
Every Land Rover Defender 110 variant compared →What does “Hard Top” actually mean? →

Check the numbers

Frequently asked

What are the interior dimensions of a Land Rover Defender 110 Hard Top AWD?

1.75 m long, 1.45 m wide and 1.30 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 4.79 m × 1.79 m × 2.04 m on a 2.79 m wheelbase.

Can I stand up in a Land Rover Defender 110 Hard Top AWD?

1.30 m floor-to-headliner, about 1.23 m after a typical 7 cm floor and ceiling build-up — a sit-down van; adults crouch or pop the top. Rule of thumb: you need a raw interior height of your own height plus 10 cm.

Can I sleep across a Land Rover Defender 110 Hard Top AWD?

1.45 m between the walls, about 1.39 m after 6 cm of finished walls — too short for an adult across; plan the bed lengthwise or add wheel-box flares.

How much payload does a Land Rover Defender 110 Hard Top AWD have?

About 985 kg: 3,050 kg gross weight minus 2,065 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.

Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.

Plan your Defender 110 Hard Top in 3D

This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.

Vladimir Šterjoski

Who makes this

I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.

Vladimir Šterjoski

vladimir@vanplot.comWhy I made it