Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD camper conversion dimensions
The Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD measures 3.70 m long, 2.24 m wide and 2.09 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.75 m wheelbase. Kerb weight 3,150 kg, payload about 3,850 kg.
Dimensions
- Cargo length
- 3.70 m
- Interior width
- 2.24 m
- Interior height
- 2.09 m
- Wheelbase
- 3.75 m
- Exterior length
- 6.59 m
- Exterior width
- 2.35 m
- Exterior height
- 3.30 m
- Kerb weight
- 3,150 kg
- Payload ≈
- 3,850 kg
- Gross weight
- 7,000 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Iveco Australia — Daily E6 cab chassis specification sheet (overall lengths, cab width, kerb, twin 225/75 R16, GVM) · checked Sep 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 2.09 m floor-to-headliner, about 2.02 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.95 m.
- Bed across: 2.24 m between the walls, about 2.18 m after 6 cm of finished walls — sleeps a 2.10 m adult transversely with 5 cm to spare.
- Parking: 3.30 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 3,850 kg — 7,000 kg gross minus 3,150 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 161 kg, roughly 3,089 kg is left for water, gear and people.
Iveco Daily 70C chassis cab WB 3750 · 3.7 m box layouts and floor plans
The gallery has no layout on the Iveco Daily 70C chassis cab yet. Its floor plans are drawn on other vans; the planner starts a Daily 70C chassis cab with its real interior dimensions and you draw your own layout.
Other Daily 70C chassis cab variants
All 4 Daily 70C chassis cab variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| WB 3750 · 3.7 m box | RWD | 3.70 × 2.24 × 2.09 m | 3,850 kg | 3.75 m | 3.30 m |
| WB 4100 · 4.1 m box | RWD | 4.10 × 2.24 × 2.09 m | 3,830 kg | 4.10 m | 3.30 m |
| WB 4350 · 4.5 m box | RWD | 4.50 × 2.24 × 2.09 m | 3,800 kg | 4.35 m | 3.30 m |
| WB 4750 · 5.2 m box | RWD | 5.24 × 2.24 × 2.09 m | 3,780 kg | 4.75 m | 3.30 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD?
3.70 m long, 2.24 m wide and 2.09 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 6.59 m × 2.35 m × 3.30 m on a 3.75 m wheelbase.
Can I stand up in a Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD?
2.09 m floor-to-headliner, about 2.02 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.95 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD?
2.24 m between the walls, about 2.18 m after 6 cm of finished walls — sleeps a 2.10 m adult transversely with 5 cm to spare.
How much payload does a Iveco Daily 70C chassis cab WB 3750 · 3.7 m box RWD have?
About 3,850 kg: 7,000 kg gross weight minus 3,150 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your Daily 70C chassis cab WB 3750 · 3.7 m box in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski