Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD camper conversion dimensions
The Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD measures 4.31 m long, 2.08 m wide and 2.00 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 4.17 m wheelbase. Kerb weight 3,700 kg, payload about 3,300 kg.
Dimensions
- Cargo length
- 4.31 m
- Interior width
- 2.08 m
- Interior height
- 2.00 m
- Wheelbase
- 4.17 m
- Exterior length
- 6.82 m
- Exterior width
- 2.20 m
- Exterior height
- 3.20 m
- Kerb weight
- 3,700 kg
- Payload ≈
- 3,300 kg
- Gross weight
- 7,000 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Iveco Australia — Daily 4x4 single & crew cab specification sheet (07/2024): wheelbases, overall lengths, heights, kerb masses, GVM 7000 · checked Nov 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 2.00 m floor-to-headliner, about 1.93 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.90 m.
- Bed across: 2.08 m between the walls, about 2.02 m after 6 cm of finished walls — sleeps a 1.95 m adult transversely with 5 cm to spare.
- Parking: 3.20 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 3,300 kg — 7,000 kg gross minus 3,700 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 163 kg, roughly 2,537 kg is left for water, gear and people.
Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box layouts and floor plans
The gallery has no layout on the Iveco Daily 4x4 chassis cab yet. Its floor plans are drawn on other vans; the planner starts a Daily 4x4 chassis cab with its real interior dimensions and you draw your own layout.
Other Daily 4x4 chassis cab variants
All 3 Daily 4x4 chassis cab variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| WB 3480 · 2.8 m box | AWD | 2.84 × 2.08 × 2.00 m | 3,330 kg | 3.48 m | 3.20 m |
| WB 3780 · 3.3 m box | AWD | 3.35 × 2.08 × 2.00 m | 3,320 kg | 3.78 m | 3.20 m |
| WB 4175 · 4.3 m box | AWD | 4.31 × 2.08 × 2.00 m | 3,300 kg | 4.17 m | 3.20 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD?
4.31 m long, 2.08 m wide and 2.00 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 6.82 m × 2.20 m × 3.20 m on a 4.17 m wheelbase.
Can I stand up in a Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD?
2.00 m floor-to-headliner, about 1.93 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 1.90 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD?
2.08 m between the walls, about 2.02 m after 6 cm of finished walls — sleeps a 1.95 m adult transversely with 5 cm to spare.
How much payload does a Iveco Daily 4x4 chassis cab WB 4175 · 4.3 m box AWD have?
About 3,300 kg: 7,000 kg gross weight minus 3,700 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your Daily 4x4 chassis cab WB 4175 · 4.3 m box in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski