Ford Transit 350 cutaway 156 in · 14 ft box RWD camper conversion dimensions
The Ford Transit 350 cutaway 156 in · 14 ft box RWD measures 4.19 m long, 2.08 m wide and 2.13 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 3.96 m wheelbase. Kerb weight 2,950 kg, payload about 1,749 kg.
Dimensions
- Cargo length
- 4.19 m
- Interior width
- 2.08 m
- Interior height
- 2.13 m
- Wheelbase
- 3.96 m
- Exterior length
- 6.83 m
- Exterior width
- 2.18 m
- Exterior height
- 3.10 m
- Kerb weight
- 2,950 kg
- Payload ≈
- 1,749 kg
- Gross weight
- 4,699 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Ford Transit 350 / 350HD cutaway: wheelbases 138 / 156 / 178 in, cab-to-axle, 81.3 in cab, GVWR 9 500–11 000 lb (Ford-fed auto123 spec pages); box from 10–16 ft DuraCube / Baybridge bodies, 86 in wide (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 2.13 m floor-to-headliner, about 2.06 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 2.00 m.
- Bed across: 2.08 m between the walls, about 2.02 m after 6 cm of finished walls — sleeps a 1.95 m adult transversely with 5 cm to spare.
- Parking: 3.10 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 1,749 kg — 4,699 kg gross minus 2,950 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 163 kg, roughly 986 kg is left for water, gear and people.
Ford Transit 350 cutaway 156 in · 14 ft box layouts and floor plans
The gallery has no layout on the Ford Transit 350 cutaway yet. Its floor plans are drawn on other vans; the planner starts a Transit 350 cutaway with its real interior dimensions and you draw your own layout.
Other Transit 350 cutaway variants
All 3 Transit 350 cutaway variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 138 in · 12 ft box | RWD | 3.58 × 2.08 × 2.13 m | 1,799 kg | 3.50 m | 3.10 m |
| 156 in · 14 ft box | RWD | 4.19 × 2.08 × 2.13 m | 1,749 kg | 3.96 m | 3.10 m |
| 178 in · HD · 16 ft box | RWD | 4.90 × 2.08 × 2.13 m | 1,890 kg | 4.52 m | 3.10 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Ford Transit 350 cutaway 156 in · 14 ft box RWD?
4.19 m long, 2.08 m wide and 2.13 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 6.83 m × 2.18 m × 3.10 m on a 3.96 m wheelbase.
Can I stand up in a Ford Transit 350 cutaway 156 in · 14 ft box RWD?
2.13 m floor-to-headliner, about 2.06 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 2.00 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Ford Transit 350 cutaway 156 in · 14 ft box RWD?
2.08 m between the walls, about 2.02 m after 6 cm of finished walls — sleeps a 1.95 m adult transversely with 5 cm to spare.
How much payload does a Ford Transit 350 cutaway 156 in · 14 ft box RWD have?
About 1,749 kg: 4,699 kg gross weight minus 2,950 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your Transit 350 cutaway 156 in · 14 ft box in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski