Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD camper conversion dimensions
The Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD measures 4.90 m long, 2.34 m wide and 2.13 m high inside — bulkhead to rear doors, between the walls, floor to headliner — on a 4.47 m wheelbase. Kerb weight 3,650 kg, payload about 2,927 kg.
Dimensions
- Cargo length
- 4.90 m
- Interior width
- 2.34 m
- Interior height
- 2.13 m
- Wheelbase
- 4.47 m
- Exterior length
- 7.46 m
- Exterior width
- 2.44 m
- Exterior height
- 3.20 m
- Kerb weight
- 3,650 kg
- Payload ≈
- 2,927 kg
- Gross weight
- 6,577 kg
Interior figures are between the walls and floor-to-headliner, derived from manufacturer specs and calibrated against published cargo dimensions. Payload ≈ gross weight minus kerb weight — it varies with engine and options, so treat it as a planning guide.
- Dimensions source: Ford E-Series cutaway: 2021 E-Series TechSpecs / Ford.ca model table (wheelbases 138 / 158 / 176 in, cab-to-axle, overhangs, GVWR 11 500–14 500 lb) via auto123; box from Dejana / Morgan 12–16 ft cube bodies (third-party table — no maker document found) · checked Oct 2026
- Door openings: estimate — the maker publishes no opening; measure your van · checked Oct 2026
What fits
- Standing: 2.13 m floor-to-headliner, about 2.06 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 2.00 m.
- Bed across: 2.34 m between the walls, about 2.28 m after 6 cm of finished walls — sleeps a 2.20 m adult transversely with 5 cm to spare.
- Parking: 3.20 m tall outside — over 2.0 m, so underground garages and most height barriers are out (French motorway class 2).
- Payload: about 2,927 kg — 6,577 kg gross minus 3,650 kg kerb. After a typical 600 kg build and the EN 1646-2 two-person reserve of 170 kg, roughly 2,157 kg is left for water, gear and people.
Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box layouts and floor plans
The gallery has no layout on the Ford E-350 / E-450 cutaway yet. Its floor plans are drawn on other vans; the planner starts a E-350 / E-450 cutaway with its real interior dimensions and you draw your own layout.
Other E-350 / E-450 cutaway variants
All 3 E-350 / E-450 cutaway variants in the planner — same body, different length, roof or drivetrain:
| Variant | Drive | Interior L × W × H | Payload ≈ | Wheelbase | Ext. height |
|---|---|---|---|---|---|
| 138 in · E-350 · 12 ft box | RWD | 3.58 × 2.34 × 2.13 m | 2,116 kg | 3.50 m | 3.20 m |
| 158 in · E-350 · 14 ft box | RWD | 4.19 × 2.34 × 2.13 m | 2,220 kg | 4.01 m | 3.20 m |
| 176 in · E-450 · 16 ft box | RWD | 4.90 × 2.34 × 2.13 m | 2,927 kg | 4.47 m | 3.20 m |
Check the numbers
Frequently asked
What are the interior dimensions of a Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD?
4.90 m long, 2.34 m wide and 2.13 m high inside — bulkhead to rear doors, between the walls, floor to headliner. Outside it is 7.46 m × 2.44 m × 3.20 m on a 4.47 m wheelbase.
Can I stand up in a Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD?
2.13 m floor-to-headliner, about 2.06 m after a typical 7 cm floor and ceiling build-up — stands an adult up to about 2.00 m. Rule of thumb: you need a raw interior height of your own height plus 10 cm.
Can I sleep across a Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD?
2.34 m between the walls, about 2.28 m after 6 cm of finished walls — sleeps a 2.20 m adult transversely with 5 cm to spare.
How much payload does a Ford E-350 / E-450 cutaway 176 in · E-450 · 16 ft box RWD have?
About 2,927 kg: 6,577 kg gross weight minus 3,650 kg kerb weight. It varies with engine and options, so treat it as a planning guide — the build, water, gear and passengers all come out of that number.
Figures derived from manufacturer specifications; interior dimensions calibrated against published cargo volumes. Always verify against your actual vehicle — model years differ.
Plan your E-350 / E-450 cutaway 176 in · E-450 · 16 ft box in 3D
This exact variant is in the planner with its real wheel arches, wall taper and door apertures. Place the bed, watch the payload — before you buy the van.
Who makes this
I'm Vladimir. I'm planning my own conversion, and none of the tools I tried could tell me whether a layout would fit or what it would do to the rear axle, so I made this one. I work on it alone. If something's wrong or missing, write to me — the address goes to my inbox.
Vladimir Šterjoski